BHT-M-Munitions-Brinell-Härteprüfmaschine
• Vollautomatisches Fräsen und Härteprüfung
• Prüfhöhe 300 mm
• Prüfverfahren HBW10/3000
• Bildauswertung mit KI-Technologie
• Siemens S7-Steuerung
• Option: Automatische Späneabsaugung
• Option: Speziell entwickelter Beladetisch
• CE-Sicherheit gemäß den Vorschriften des Bestimmungslandes
Testing procedure:
• The workpiece is placed on the loading platform by the operator or via the customer's loading system.
• The milling and testing cycle is then started by the operator.
• The workpiece is clamped in place and a small milling operation is performed.
• The milling chips are removed via an optional extraction device.
• The hardness test head is swung into position and the actual test according to HBW10/3000 is started.
• The result is displayed on the monitor along with an image.
Key data:
• Simplified design for pipes and sleeves
• ZB Caliber 155 mm
• Fully automated milling and hardness testing
• Test procedure HBW10/3000, alternatively HBW5/750 or HRC
• Milling depth adjustable from 0.5 to 6 mm
• Siemens S7-300 controller
• Standard hardness testing unit from ATM Qness GmbH
• Image analysis using QIA technology
• Test height 300 mm
BHT-M testing machine for determining the Brinell hardness of ammunition
• Vollautomatisches Fräsen und Härteprüfung
• Prüfverfahren HBW10/3000
• Bildauswertung mit KI-Technologie
• Siemens S7-Steuerung
• Option: Automatische Späneabsaugung
• Drehtisch mit 2 x 180 Grad Schwenkbereich
• Roboter für Be- und Entladung verfügbar oder kundenseitig
• CE-Sicherheit gemäß den Vorschriften des Bestimmungslandes
Test procedure:
• The workpiece is placed into the fixture by the robot.
• During this loading and unloading process, the second workpiece is milled in the machine and subjected to a hardness test.
• The milling chips are removed via an optional extraction device.
• The hardness test head is swung into position and the actual test according to HBW10/3000 is started.
• The result is displayed on the monitor along with an image.
Key data:
• Simplified design for pipes and sleeves
• Fully automated milling and hardness testing
• Test procedure HBW10/3000, alternatively HBW5/750 or HRC
• Milling depth adjustable from 0.5 to 6 mm
• Siemens S7-300 controller
• Standard hardness testing unit from ATM Qness GmbH
• Image analysis using QIA technology
• Test height 300 mm
• Cycle time for one workpiece approx. 40 seconds